SONNY'S Surface ConveyorMaterial ID: CONV_SUR
- Equipment details
|Tire Clearance Required||12-1/2in||317.5mm|
|Vehicle Clearance Required||4-1/2in||114.3mm|
|Hydraulic Required||Varies, based on length|
|Air Required||2CFM @ 120PSI|
|Floor Plate - Painted Steel||5/16in||7.9mm|
Why Choose SONNY'S Surface Conveyor?
- 14ft roller spacing with reliable air-over-oil chain tensioning system provides consistent tension and easily collapses for faster servicing with less downtime.
- Features a 5/16in base plate and 5/8in steel log chain for incredible strength, reliability, and life expectancy.
- 3in x 3in x 1/2in UHMW guide rail is installed on the driver side to provide wheel rim protection.
- Includes HECO® gear box with a hydraulic motor and take-up idler drum.
|Front Wheel Pull on Demand Includes:*||Rear Wheel Push on Demand Includes:*|
|Entrance Box||Entrance Box|
|Entrance Section||Entrance Section|
|Roller-Up Section, FWP||Roller-Up Section, RWP|
|Filler Section, FWP only||Filler Section, RWP only|
|Exit Section||Exit Section|
|Exit Drive Box||Exit Drive Box|
Simple & reliable, SONNY'S All Roller-Up conveyor provides an affordable option for low-volume or hand wash tunnels to utilize a conveyor where building constraints call for a limited amount of concrete work.
Front Wheel Pull:
Vehicle is driven onto the surface conveyor until the front wheel of that vehicle passes the roller-up opening in the conveyor. The automated roller-up cylinder sends a roller to pull the front driver side wheel and send the vehicle through the wash process.
Rear Wheel Push:
A specialized section allows the roller to surface further along the conveyor path. Once the vehicle is placed over the conveyor, the automated roller-up cylinder sends a roller to push the back driver-side wheel and send the vehicle through the wash process.