Pack of 20 - Wooddruff Key Half Moon - Dimension: 1/4in Width x 1in Height - Used on Hydraulic Top Mount Motors.

Rubber Bumper Stop with/nuts - 1-1/2in O.D. x 1-1/4in Length - Rod Thread 1/2-13 course x 2-1/2in stud length

Anchor Kit for Applicator Arch, Rinse Arch Wax Arch - (8) Per Box - Dimension; 1/2in x 4in - Carbon Steel Zinc Plated - Wedge anchors
are designed to anchor fixtures into concrete.

*This part replaces old part #10004388

Rubber Bumper Standard Duty - Used on Pendulum - 4-1/2in x 4in Rubber Bumper Standard Duty - Used on Pendulum - 4-1/2in x 4in Rubber Bumper Standard Duty - Used on Pendulum - 4-1/2in x 4in

Rubber Bumper Stop - 2in O.D. x 1-5/8in Length - Rod Thread 1/2-20 course x 1-1/4in stud length

Hose Clamp - HOS-032 - 1-9/16in to 2-1/2in Max Diameter - Stainless Steel - 5/16in Hex Slotted - 1/2in Band - MS Series - Sold in Box of Ten
- Used on the H25 pump station

Rubber Bumper Stop - 1-1/2in O.D. x 2in Length - Rod Thread 1/2-13 course x 1-1/4in stud length

Rubber Bumper Heavy Duty - Used on Top Brush

Rubber Bumper Stop - 3in Diameter O.D. x 2-1/4in Length - Uses 1/2-13in Rod Thread Bolt

Sonny's Replacement for Hanna. Rubber Bumper Stop - 2in O.D. x 3in Length - Rod Fine Thread 1/2-20 x 1-1/8in stud length

Pivot Bolt and Nut 1in x 17in Long - Zinc Plated - Used on Pivot arm of side brush SF35 and SF63

Set Screw Knurl - 3/8-16 x 1in - 37C100KSCD - Steel - Pack of 50

Sonny's Replacement for Ryko - Rubber Bumper Stop - 2in O.D x 1-5/8in Length - Rod Thread 1/4-20 course x 1-1/2in stud length - Used on Ryko
Arms,Top Brush and Rail Tracks Soft Gloss

Socket Cap Screw - M8-1.25 x 30 - .8C30KCSS - Stainless Steel - Pack of 25

Woodruff Key Half Moon - Dimensions: 1/4in Width x 1-1/8in Height - Used on Hydraulic Bottom Mount Motors - Pack of 20

Socket Set Screw Cup, 5/16-24 x 7/8in - Used on SealMaster Bearing, Vacuum Turbine - Pack of 10

Rubber Bumper Stop - 1-3/4in O.D. x 1-5/8in Length - Sonny's Replacement Used on MacNeil RG440 Conveyor (44-081-00-PP ) Accepts Rod Course Thread
Size 5/8-11 - Used on MacNeil Safty Door Exit End.

Sonny's Replacement for Hanna (Hanna 801133) Carriage Bolt. 24in Length x 1-8in Coarse Thread with Hardware.