UHMW Rail Cover 3in x 3in x 1/2in Yellow Angle x 15ft Length. - Shipped Via Truck Only

X458 Pin Only for X458 Chain

X458 Center Link Only for X458 Chain

UHMW (Poly) #2 Idler Wheel - Dimension; 2-1/4in Diameter x 2-1/4in Length x 7/8in Bore.

X458 Side Bar Only for X458 Chain

UHMW (Poly) Pusher Wheel - Dimension; 2-1/4in Diameter x 4in Length x 1in Bore. - Used on Sonny's 6-Wheel Low, Tall, and Mid Profile Roller.

UHMW (Poly) Pusher Wheel - Dimension - 3in Diameter x 3-5/8in Length x 1in Bore. Used on Sonny's 4-Wheel and 6-Wheel Mid Profile Roller.

Pin and Nylon Lock Nut for SC78 Chain - Pin Dimension; Diameter 1/2in x 2.347in Lenght - Pin end is square peg design prevents pin rotation,
extending life of the SC78 steel chain design.

Bolt Hardware Kit - (8-Total) for Heco and Steel Plate Installation - Bolts, Washer and Lock Nuts to install plate and Heco Gear Box.

Log Chain Loose Link Only Heat Treated for Connecting Chains Together

Carrier Link - SC78 - with Pin and Cotter - Used on conveyor system with SC78 Chain - Used on roller assemblies with removable 7/8in axle - (1)
Required per roller assembly.
1-piece link can be used with rollers that have a removable rear shaft
to reduce side-to-side movement of the roller and premature roller wear.

Conveyor Chain - SC78 - Pin and Cotter Section - Chain Pitch 2.609 - Sold in 16 Pitch Section = 3'6in Length - ( Used as master link section.
)

Sonny's Frame Only Mid Profile - Material; Steel

Sonny's - Frame Only Low Profile - Material; Steel Sonny's - Frame Only Low Profile - Material; Steel

Air Take-up Fork Hanger with bushing, Driverside. ( Used on conveyor Fall 2007 to Spring of 2008 )

Exit Rubber Belt with Holes. Used to Reduce Noise from Rollers Returning to Bottom Shelf Deck 3in Wide x 18.00in Length. Used on Sonny's Spring
Take-up and Air Take-up Conveyors.

Sonny's Conveyor Take-Up 12-Tooth Sprocket - Shaft Diameter; 1-15/16in - Shaft Length; 10-3/16in - Accepts chain; D81X / D88K / D88KCW#2 / C188 /
BRH188 / SC78 - Used on SONNY'S Over Under Conveyor

Fork Hanger with 1-1/4in AMI Bearing - Used on Air Take Up - Material; - Steel Painted.