E5 Coupler, Kit 15HP, 20HP, 25HP & 30HPMaterial ID: 20002996
TB Wood's Dura-Flex E5 Coupler Hubs Halfs Kit with Element for 15HP, 20HP, 25HP & 30 HP Vacuum Turbine. Used on Sonny's Central Vacuum Systems
This item can not be overnighted.
TB Wood’s Dura-Flex® E5 Coupler
- Easy two piece element installation. No need to move the hubs during replacement
- One spacer size to handle most differences between shaft spacings
- Lightweight element absorbs shock loading and torsional vibration
- Same hubs used on both spacer and standard element
- Good chemical resistance, and no lubrication needed
- Parallel alignment may be checked by placing a straight
edge across the
two hubs and measuring the maximum offset at various points around the
periphery of the hubs. Do not rotate shafts. Reposition motor until offset is
as small as possible.
- Capscrews have self-locking patches which should not
used more than twice.
- Capscrews can be further used with application of a thread-locking adhesive.
- Do not lubricate capscrew threads.
- Recommended capscrew torques for proper intallation: 17 FT-LB
|Used-On||SONNY'S Central Vacuums|