Carrier Link - Peco X458 - Used on conveyor system with X458 Chain - Used on roller assemblies with 7/8in axle - (1) Required per roller
assembly

2-7/16in Keyed Bore Conveyor Drive 12 Tooth Sprocket - Accepts chainD81X / D88K / D88KCW#2 / C188 / BRH188 / SC78 chains with 2.609 pitch - Used
on 2-7/16 Heco Shaft Diameter

Peco 4-Wheel Roller RCV Assembly - with #3 Idler Wheels and X458 Carrier Link.

Rear Idler Steel Axle Shaft Pin - 7/8in Diameter x 4-7/8in Length with out center axle bolt hole.

Peco 4-Wheel Roller RCV Assembly - with #3 Idler Wheels and D88K Carrier Link.

2-1/4in Keyed Bore Conveyor Drive 12 Tooth Sprocket - Accepts chain; D81X / D88K / D88KCW#2 / C188 / BRH188 / SC78 - 2 1/4in Keyed Bore -
SONNY'S Replacement for Peco Over Under Conveyor

PE-CAP-PVC, 1/2 NPT (GREY) (HEX TOP)

PE-MC-RACK-UHMW, CLOTH SUPPORT ANGLE

PE-MOTOR-HYD, 101-3326 CHAR-LYNN W/HP

PE-TAPERLOCK, 1-3/8 (2012)

PE-NOZZLE BODY-PLASTIC, 3/4 WET BOOM

PE-BEARING-BUSHING-3/4, UHMW (RED)

PE-BEARING-BUSHING-1, UHMW (RED)

PE-MOTOR-ELEC, 1-1/2HP 1800RPM 145TC

PE-MC-DRIVE ARM-ALUM, ASSEMBLY COMPLETE

PE-SENSOR, ALLEN BRADLEY PROXIMITY

PE-CF4 CONVEYOR FLAG 4 PULSE

PE-CPS CONVEYOR PULSE SWITCH W/HOLDER