Carrier Link - Peco X458 - Used on conveyor system with X458 Chain - Used on roller assemblies with 7/8in axle - (1) Required per roller
assembly

2-7/16in Keyed Bore Conveyor Drive 12 Tooth Sprocket - Accepts chainD81X / D88K / D88KCW#2 / C188 / BRH188 / SC78 chains with 2.609 pitch - Used
on 2-7/16 Heco Shaft Diameter

Peco 4-Wheel Roller RCV Assembly - with #3 Idler Wheels and X458 Carrier Link.

Please Call to Order Peco - NeoGlide Material for PE372 Wrap Around Top Section - 46in x 10in Hub

Please Call to Order Peco - PermaColor Cloth for MC08 Wash-Across Mitter - Side-to-side - 8 basket

Please Call to Order Peco - PermaColor Cloth for MC35 Wash A-Diagonal Mitter - Diagonal - 6 basket

Please Call to Order Peco - PermaColor Cloth for MC06 Wash-Along Mitter - Front-to-back - 6 basket

Please Call to Order Peco - PermaColor Cloth for PE128 Rocker Panel 28in - 28in x 10in - Hub

Please Call to Order Peco - PermaColor Cloth for PE135 Side Washer - 34in x 12in - Hub

Rear Idler Steel Axle Shaft Pin - 7/8in Diameter x 4-7/8in Length with out center axle bolt hole.

Peco 4-Wheel Roller RCV Assembly - with #3 Idler Wheels and D88K Carrier Link.

2-1/4in Keyed Bore Conveyor Drive 12 Tooth Sprocket - Accepts chain; D81X / D88K / D88KCW#2 / C188 / BRH188 / SC78 - 2 1/4in Keyed Bore -
SONNY'S Replacement for Peco Over Under Conveyor

PE-SHAFT-STL, 1-1/2 x 96L STRESS PROOF

PE-PUMP-VICKERS, 25VQ21A1A20 HYDRAULIC

PE-NOZZLE-ROTATING, 30 DEGREE 5.5

PE-CLAMP-PLASTIC, 1/2" TUBE GR2 BLACK

PE-MC-BASKET-ALUM, IDLER

PE-MOTOR-PECO, eDRIVE 50/60HZ-INPUT