X458 Pin Only for X458 Chain

Bell Hose Tire Switch Signal Hose - Standard Size; .375 Inside diameter with heavy duty .110 Wall Thinkness. - Excellent rating in both high and
low temperature. - ( Price Per Foot )

X458 Center Link Only for X458 Chain

X458 Side Bar Only for X458 Chain

Push-In Fitting for Polyethylene and Nylon Tubing - Elbow Swivel - 20- 081 - 1/4in Tube x 1/8in MNPT - Brass

Sonny's Replacement Part for MacNeil. Extension Spring with End Hooks - 5in Length x 3/4in O.D. for MacNeil RG440 Conveyor ( 44-454-00 ) - 302
Stainless Steel

SMC - One Touch Fitting - Pneumatic Flow Control - AS3211F-N02-11SA - 1/4in MNPT x 3/8in Tube

Normally Open Operated Switch - Bell #16 Diaphragm Switch 24VAC/DC with Cap - Dimension; 2-1/2in Diameter x 3-1/4in Height - Molded Stem 3/8in
Hose Connection. Cap color may vary.

Polyethylene Tubing - 3/8in O.D. x .250 I.D. -100PSI Max Operating Pressure - Black - Pricing Per 100 FT Length.

Rod End Bearing TF-7N Female with Bronze Race and Grease Fitting - 7/16in Bore - Thread Direction: Right Hand - Thread Size: 7/16-20in

Heco Gear - Bolt Kit - BK-16-0 - for Models 16 Series

Rod End Bearing TF-8N Female with Bronze Race and Grease Fitting - 1/2in Bore - Thread Direction: Right Hand - Thread Size: 1/2-20in

Shock Air Hose Kit for air tensioning conveyor shocks - Sonny's Replacement Used on Sonny's and MacNeil Conveyors (MA278 and MCNSHK)

Sterling - Nema Premium Efficiency Motor - 3 HP - Enclosure TEFC - Frame 182TC - Mounting - C Face Footless - RPM 1800 - Phase 3 - Voltage 208 -
230/460 - Hertz 60 - Service Factor 1.15 - Rolled Steel - Wash-down Duty

Char-Lynn H-Plus Hydraulic Motor - 101-1010-009 - 4-Bolt Mount - 7/8-14 O-Ring Inlet/Outlet Ports - 1in Keyed Output Shaft - Disp in³/rev 4.5 -
Ring Size 1/4in

Sonny's Replacement Part for MacNeil. Heco Gear - 16CF2-05-7-A22 4-Bolt Center Flange - 16 Series - Flange Hub with 1/2-20 UNF Stud - Nickel
Plated Shaft - Nickel Plated Seal Carrier - 5 to 1 Ratio - Used on
MacNeil Conveyor

Char-Lynn 2,000 Series Bearingless Hydraulic Motor - 106-1015-006 - 4- Bolt Flange Mount - 7/8-14 SAE Straight Thread O-Ring - Ports - 12 Tooth
Spline - Disp in³/rev 24.9 - SAE-4 Case Drain

Sterling - Nema Premium Efficiency Motor - 5 HP - Enclosure TEFC - Frame 184TC - Mounting - C Face Footless - RPM 1800 - Phase 3 - Voltage 208 -
230/460 - Hertz 60 - Service Factor 1.15 - Rolled Steel - Wash-down Duty